- What is the pH of 0.1 N NaOH?
- How do you make 0.2 N h2so4?
- How do you calculate the molarity of h2so4?
- How would you make a 0.5 normal solution of HCL?
- How do you make a 0.1 solution?
- How do you make a 0.1 molar NaOH solution?
- How do you make a 10% solution?
- What is the molarity of 2n h2so4?
- How do you make a 0.1 molar h2so4 solution?
- How can we prepare 0.1 N NaOH in 100 ml?
- What is the pH of a 0.1 M sulfuric acid?
- What is a normal solution?

## What is the pH of 0.1 N NaOH?

Some common bases as sodium hydroxide, ammonia and moreBaseNormalitypHSodium carbonate (washing soda)0.1 N11.6Sodium hydroxide (caustic soda)N14.0Sodium hydroxide0.1 N13.0Sodium hydroxide0.01 N12.023 more rows.

## How do you make 0.2 N h2so4?

0.02 N Standard Sulphuric acid (H2SO4): Dilute 2.8ml of conc. H2SO4 to 1 L by adding distilled water to form approximately 0.1N Sulphuric acid (H2SO4).

## How do you calculate the molarity of h2so4?

Expert Answer:Mass of solute in 100ml of solution = 90 g of H2SO4Moles = Mass of solute in 100ml in solution = 90 = 0.9183. Molar mass 98.Volume = mass X density.Wt of 100ml of solution = 100 X 1.8 = 180 g.Solution = solvent + solute.180= x + 90.x = 180 -90 = 90 g.Molarity = No.

## How would you make a 0.5 normal solution of HCL?

So to make approximately 0.5N hydrochloric acid, you dilute the conc. HCl 24 times. To make a litre, you’d measure 42 ml of the conc. acid (because 1000/24=41.7) and add it to about 800 ml of water.

## How do you make a 0.1 solution?

You can first prepare 0.5% solution (0.5 g per 100 ml) and for 0.25, 0.1, 0.025 and 0.05%, respectively, dilute to half, one fifth, one twentieth and one tenth. For example, add 9 ml water to 1 ml of the stock solution, to 10 times dilute and obtain a concentration of 0.05%.

## How do you make a 0.1 molar NaOH solution?

So the equivalent weight of NaOH is 40. To make 1 N solution, dissolve 40.00 g of sodium hydroxide in water to make volume 1 liter. For a 0.1 N solution (used for wine analysis) 4.00 g of NaOH per liter is needed.

## How do you make a 10% solution?

Pour it into a graduated cylinder or volumetric flask containing about 80ml of water. Once the sodium chloride has dissolved completely (swirl the flask gently if necessary), add water to bring the volume up to the final 100 ml. A 10% of alcohol solution by volume has ten ml of alcohol dissolved in 100ml of solution.

## What is the molarity of 2n h2so4?

There exist a relation between molarity and normality which is normality is the molarity multiplied by n-factor. Here the n-factor is 2 for sulphuric acid so the molarity will be 2/2 = 1M.

## How do you make a 0.1 molar h2so4 solution?

Preparation and Standardization of 0.1 M Sulphuric AcidAdd slowly, with stirring, 6 ml of Sulphuric acid to about 800 ml of purified water.Makeup to 1000 ml with purified water.Allow cooling at 25°C.

## How can we prepare 0.1 N NaOH in 100 ml?

To make 0.1N NaOH solution = dissolve 40 grams of NaOH in 1L of water. For 100 ml of water = (4/1000) × 100 = 0.4 g of NaOH. Thus, the amount of NaOH required to prepare 100ml of 0.1N NaOH solution is 0.4 g of NaOH.

## What is the pH of a 0.1 M sulfuric acid?

pH of common acids like sulfuric, acetic and moreAcidNormalitypHSulfuricN0.3Sulfuric0.1 N1.2Sulfuric0.01 N2.1Sulfurous0.1 N1.527 more rows

## What is a normal solution?

What is a Normal Solution? Normality (N) is another way to quantify solution concentration. It is similar to molarity but uses the gram-equivalent weight of a solute in its expression of solute amount in a liter (L) of solution, rather than the gram molecular weight (GMW) expressed in molarity.