Quick Answer: Why Do We Use Condenser?

What is the liquid that leaves the condenser called?

distillate 5What is the liquid that leaves the condenser called.

The liquid that leaves the condenser is called thedistillate 5.

Why are glass beads added to the heating vessel?.

What does a condenser do on a car?

The air-conditioning condenser is a radiator positioned between the car’s grille and the engine-cooling radiator in which the gaseous refrigerant sheds heat and returns to a liquid state. The liquid refrigerant flows to the evaporator inside the dashboard, where it cools the cabin.

How is the condenser kept cold?

When water is allowed to flow into the condenser, it surrounds the inner tube and creates a cooling effect. That way when the vapors from the boiling liquid hit the cool area of the Liebig condenser, they condense back to liquid form, which is how the condenser actually works!

How does a condenser work?

Inside the condenser, the refrigerant vapor is compressed and forced through a heat exchange coil, condensing it into a liquid and rejecting the heat previously absorbed from the cool indoor area. The condenser’s heat exchanger is generally cooled by a fan blowing outside air through it.

How many types of condensers are there?

three typesThere are three types of condensers: air cooled, water cooled and evaporative.

What is the difference between jet condenser and surface condenser?

Surface condensers (or non-mixing type condensers). In surface condensers, there is no direct contact between the exhaust steam and the cooling water. … In jet condensers there is direct contact between the exhaust steam and cooling water.

What are the three functions of a condenser?

Condensers. A condenser’s function is to allow high pressure and temperature refrigerant vapor to condense and eject heat. There are three main types: air-cooled, evaporative, and water-cooled condensers.

Why it is called surface condenser?

Condense the steam by indirect contact, with the cold surface of the tubes in a shell-and-tube condenser. Thus the term surface condenser. Simply by condensing thru cold surface and not by direct mixing of cold fluid.

What is the reason for running cold water through condenser?

what is the reason for running cold water through condenser from lower side. This helps to lower the temperature of the system so that the vapours produced during the reaction can be distilled in liquid form and can easily be collected.

What is condenser efficiency?

Condenser Performance. For a given steam turbine system, the performance of the condenser is largely a factor of how efficiently heat can be transferred from the steam to the cooling water. … One metric of this condensation efficiency is the condenser pressure, often measured as vacuum.

What is the purpose of a condenser in distillation?

In a distillation, liquid compounds can be separated from one another based on differences in boiling points of the liquids in a mixture. The purpose of the condenser is to cool the vapors of the components of the mixture, allowing them to condense to liquid form and be collected.

What is the difference between a compressor and a condenser?

The main difference between the compressor and condenser is indicated by their names, respectively. In a nutshell, the compressor compresses and the condenser condenses. … Keep in mind, the refrigerant is a gas as it travels through the compressor – still a gas, yet slightly altered in order to be made into liquid vapor.

What does a condenser do in electronics?

A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator).

Why vacuum is used in condenser?

Vacuum applies to steam turbines because the pressure of saturated vapour above available cooling water is well below 1 bar. So the condenser has such a vacuum and takes exhausted steam from the turbine and gives condensate for feeding back to the boiler through condensate extraction pumps.